Speciaal voor de Yaesu FT3D heeft Gerton PD0G een nieuwe codeplug gemaakt met hierin alle repeaters en andere interessante kanalen. De codeplug is gemaakt met de populaire RTSystems YPS-FT3D Programming en de nieuwe Yaesu FT3D Software. Gerton is voor vragen over de FT3D te bereiken via Facebook!
De software van Yaesu kan je hier downloaden!
De software kan je hier bestellen!
De codepluggen vind je hier!
Met dank aan Gerton PD0G.
| Model name | IC-9700 |
|---|---|
| Download Type | Firmware |
| Version | Version 1.21 |
| Update | 2019/12/13 |
| Notes | Changes from Version 1.20Fixed the problem where the scan might not stop, even when the transceiver receives a signal.With the previous firmware, there was a delay in sounding the standby beep when the transceiver communicated with other manufacturers’ DV equipment*. With the latest firmware, the transceiver sounds the standby beep with no delay, even when the transceiver communicates with other manufacturers’ DV equipment.*It does not occur when directly communicating with transceivers and/or application software made by Icom or Kenwood.To update the firmwareThoroughly read 13. UPDATING THE FIRMWARE of the ADVANCED MANUAL and follow the instructions displayed on the IC-9700 LCD screen.This update initializes the transceiver’s settings when updating from a firmware earlier than version 1.20. Save your current settings before updating the firmware, and then write it back to keep the previous setting on the updated firmware.The firmware will be updated to the following versions. Main CPU: 1.21 Sub CPU: 1.00 Front CPU: 1.00 FPGA Program: 1.06 FPGA Data: 1.00 DV DSP: 1.05 |
| File Type | ZIP |
| File Size | 12.9MB |
| Manual | IC-9700 |
Meer informatie vind je hier!
Calling all radio amateurs! ESA is challenging anyone with amateur radio equipment to catch the first signals from OPS-SAT, ESA’s brand new space software laboratory.
Meer informatie vind je hier!
Tuning to several QO100 signals can be tedious, particularly when they only appear for a few seconds.
To overcome this, Rob M0DTS has developed a small application designed to run on a PC that grabs the fft data from the BATC Wideband Spectrum monitor page. This then allows the user to click on signals which automatically configures Minitioune to the required settings to receive the signal via udp control.
